KPF2K-20
Special grease GLS 163
ELKALUB GLS 163 is a short-fibrous, green grease of an increased purity and a high resistance to pressure for use in roller and antifriction bearings. The grease has a very thixotropic behaviour, which means, that the penetration values are almost 100 points lower in state of rest (the grease is more solid). This behaviour is of advantage in badly sealed bearings or in bearings with a higher tolerance. The conveyability of ELKALUB GLS 163 in central lubrication units is good. The grease does not bleed. Because of the thixotropy, the supply bin must have a follow-up piston to put the grease under pressure. Slight pressure renders the grease immediately flowable. The fine-granular, partly synthetic grease has a very flexible texture, therefore being ecellently suited for small, perpetually changing alterations of guide motion. In state of rest, the grease regenerates almost to its initial values. Due to its chemical composition, ELKALUB GLS 163, under increased temperatures which can result from exterior or interior conditions, builds up Mos2. In these cases, Mos2 takes over the lubrication. The points of lubrication then look grey or black. Examples for application: Gripper shafts (also in UV and varnish areas), spindles, badly sealed slow bearings, wellsealed rapid bearings.
- roller bearing
- bearings
- open gears
- racks
- Power Tools
- bearing manufacturer
- 250 g tube
- 100 g cartridge
- 380 g LubeShuttle
- 400 g cartridge
- 5 kg bucket
- 18 kg hobbock
- 50 kg hobbock
- 150 kg barrel
+49 7454 9652 0
mon - fri 9 am - 4 pm